NEW RELEASE: VALVE SPRINGS for VR38 R35 GT-R

INSTALL WITH PONCAM/PROCAM CAMSHAFTS FOR BEST RESULTS!

 20161130_02 20161130_03 20161130_04

20161130_06

20161130_07

20161130_08

20161130_10
20161130_12Combining multiple spring rates into one valve spring dramatically increases it’s natural frequency. This improves the spring’s harmonic resistance which also helps reduce the chance of spring surge.

 

 

 

 

 

20161130_27

20161130_16
Standard oil tempered chrome silicon wire is widely considered to be the best material for manufacturing springs. However, these valve springs are made using an enhanced version of the material. Paired with our highly optimized valve spring design, these springs offer increased maximum rpm as well as improved resistance to fatigue and valve ‘jump’/’bounce’.

 

20161130_18
‘The ‘Shot Peening’ process involves the spring’s surface being ‘shot’ with countless steel pellets/particles. This forms a layer of residual stress on the surface which improves the spring’s resistance to fatigue.

 

20161130_20
‘Hot Setting’ is when the spring shape/form is set in high temperatures using a far greater load than intended. In doing so, the spring is able to maintain and consistantly deliver a high level of performance over a long period of time.

 

20161130_22
20161130_24Nitriding is used to further harden the surface of these valve springs. The process invloves the springs being treated with nitrogen which, once absorbed, causes the spring’s surface to compress and harden. This process was sepcifically employed to reduce spring fatigue when using high lift camshafts. The graph (left) shows the failure threshold of common valve springs compared to our own Nitiride treated version made using enhanced Oil Tempered Chrome Silicon Wire. Our test results showed a 50% increase in fatigue resistance making them compatible with high rpm applications.

20161130_27

 

20161130_29
20161130_31Oval wire valve springs feature greater compression than regular valve springs, allowing them to work with a wider range of ‘lift’ settings. This makes them compatible with both stock AND aftermarket high lift camshafts. (VR38/VQ35/KA24/4G63/4B11/G4KF)

Using highly durable oval wire allows the valve springs to compress even further whilst still retaining sufficient force. Compatible with many high lift camshafts, these springs provide reliable performance even under load at higher RPMs.

 

20161130_33 20161130_34

 

 

20161130_36
20161130_3720161130_38
20161130_39
20161130_41

20161130_4320161130_4420161130_45
20161130_46 20161130_47

 

20161130_50

 

20161130_53 20161130_54

NEW! MX-5 MIATA / 350Z G35 HEAD GASKET!

■PRECISION WATER/OIL ROUTE SEALS
■ULTRA DURABLE, HIGH PERFORMANCE HEAD GASKETS
■HIGHLY OPTIMIZED, ENGINE SPECIFIC CONSTRUCTION
■MULTIPLE THICKNESSES FOR CR ADJUSTMENT
■MADE USING PREMIUM GRADE MATERIALS AND COATINGS

20161118_01 20161118_02

20161118_06 20161118_07 20161118_08 20161118_09 20161118_10

20161118_12 20161118_13 20161118_14 20161118_15 20161118_16 20161118_17 20161118_18

20161118_20
20161118_21 20161118_22 20161118_23 20161118_24 20161118_25 20161118_26 20161118_27 20161118_28 20161118_29 20161118_3020161118_31 20161118_32 20161118_33 20161118_34 20161118_35

20161118_37 20161118_38 20161118_39 20161118_4020161118_41 20161118_42 20161118_43 20161118_44 20161118_45 20161118_46

20161118_48 20161118_49

20161118_51 20161118_52 20161118_53 20161118_54 20161118_55 20161118_56 20161118_57 20161118_58 20161118_59 20161118_60
20161118_61 20161118_62

20161118_64 20161118_65 20161118_66 20161118_67 20161118_68

20161118_70
20161118_71  20161118_73 20161118_74 20161118_75 20161118_76
wp_20160729_23_02
wp_20160729_23_03

20161118_04

PROJECT KA24DE/240SX PHASE2 CAMSHFTS/VALVESPRING OUT NOW!!

PROJECT KA24DE/240SX PHASE2 CAMSHFTS/VALVESPRING
PONCAM
・Noticable, linear gains in performance・Stable idling・Works best with ‘bolt-on’ type turbos
・Compatible with stock valve springs・Works with both NA and TURBO
VALV SPRINGS
Made from Oval Wire ,
Specifically Designed For High Lift Camshafts!!
20160930_01

20160930_03
20160930_04
20160930_05
20160930_06
20160930_07
feature

20160930_09
20160930_11

This product is intended for turbocharged engines.
When installing on a naturally aspirated engine, the optimal valve timing will need to be set using adjustable cam gears.

For further guidance on valve timing optimization, please refer to the installation manual and/or the ‘Valve Timing Calculator’ available on the TOMEI USA homepage.

Please note that all adjustments and/or tuning should be conducted based on the specifications of your particular vehicle/engine setup.
20160930_13
20160930_14
20160930_15
20160930_16
20160930_17
20160930_18
20160930_19
20160930_20
20160930_21
20160930_22
20160930_23
20160930_24
20160930_25
20160930_26
20160930_27
20160930_28
20160930_29
20160930_30
20160930_31
20160930_32
20160930_33
20160930_34
20160930_35
20160930_36
20160930_37
20160930_38
20160930_39
20160930_40
20160930_42
20160930_43
20160930_44
20160930_4520160930_46

 

 

 

 

 

 

 

 

 

 

 

20160930_47

20160930_48

 

 

 

 

 

20160930_53 20160930_55
20160930_56
20160930_57