アーカイブ

‘GTR’ カテゴリーのアーカイブ

NEW RELEASE: VALVE SPRINGS for VR38 R35 GT-R

2016 年 11 月 30 日 Comments off

INSTALL WITH PONCAM/PROCAM CAMSHAFTS FOR BEST RESULTS!

 20161130_02 20161130_03 20161130_04

20161130_06

20161130_07

20161130_08

20161130_10
20161130_12Combining multiple spring rates into one valve spring dramatically increases it’s natural frequency. This improves the spring’s harmonic resistance which also helps reduce the chance of spring surge.

 

 

 

 

 

20161130_27

20161130_16
Standard oil tempered chrome silicon wire is widely considered to be the best material for manufacturing springs. However, these valve springs are made using an enhanced version of the material. Paired with our highly optimized valve spring design, these springs offer increased maximum rpm as well as improved resistance to fatigue and valve ‘jump’/’bounce’.

 

20161130_18
‘The ‘Shot Peening’ process involves the spring’s surface being ‘shot’ with countless steel pellets/particles. This forms a layer of residual stress on the surface which improves the spring’s resistance to fatigue.

 

20161130_20
‘Hot Setting’ is when the spring shape/form is set in high temperatures using a far greater load than intended. In doing so, the spring is able to maintain and consistantly deliver a high level of performance over a long period of time.

 

20161130_22
20161130_24Nitriding is used to further harden the surface of these valve springs. The process invloves the springs being treated with nitrogen which, once absorbed, causes the spring’s surface to compress and harden. This process was sepcifically employed to reduce spring fatigue when using high lift camshafts. The graph (left) shows the failure threshold of common valve springs compared to our own Nitiride treated version made using enhanced Oil Tempered Chrome Silicon Wire. Our test results showed a 50% increase in fatigue resistance making them compatible with high rpm applications.

20161130_27

 

20161130_29
20161130_31Oval wire valve springs feature greater compression than regular valve springs, allowing them to work with a wider range of ‘lift’ settings. This makes them compatible with both stock AND aftermarket high lift camshafts. (VR38/VQ35/KA24/4G63/4B11/G4KF)

Using highly durable oval wire allows the valve springs to compress even further whilst still retaining sufficient force. Compatible with many high lift camshafts, these springs provide reliable performance even under load at higher RPMs.

 

20161130_33 20161130_34

 

 

20161130_36
20161130_3720161130_38
20161130_39
20161130_41

20161130_4320161130_4420161130_45
20161130_46 20161130_47

 

20161130_50

 

20161130_53 20161130_54

NEW RELEASE: ALL NEW VR38DETT ‘VALC’ CAMSHAFTS!

2016 年 4 月 28 日 コメントはありません

Optimized ‘velocity’ and ‘acceleration’.  Designed for high power setups.  Optimizes engine performance.  Higher lift than other profiles of the duration.  Reduced stress/wear on the valve train.