An All New Revised 950cc version, 124% larger than previous model!
Push the limits of SR20DET tuning with our all new revised outlet pipe design. Evolving with the trends and times, we’ve made our all new high flow design. This is now 124% larger than our previous model. With noticeable performance gains with the stock Turbos and our ARMS turbo kits, you can now experience more power gains with this simple direct bolt on product.
Large Capacity 950cc
3 Inch Wide Mouth
With O2 Sensor Boss
Lost Wax Precision
KIT CONTENTS
TURBINE OUTLET PIPE x1
OUTLET GASKET x1
STUD BOLT x3
NUT x3
SPRING WASHER x3
O2 SENSOR ADAPTER x1
COPPER WASHER (423001 Only) x1
HEX BOLT (423002 Only) x3
HOSE BAND (423002 Only) x1
EAI BLIND CAP (423002 Only) x1
186% LARGER THAN STOCK, 124% LARGER THAN PREVIOUS MODEL
Upon revising the new design, we’ve optimized the space allowed in the engine bay with this lost wax cast product. This lost wax process allowed us to produce a larger diameter and capacity with the larger shape resulting in the added strength and precision of the fitment.
All this with a minimal weight gain on this product compared to the previous model.
WIDE MOUTH & 3 INCH PIPE
The port shape to the turbo has been optimized for maximum flow. The inner parts are all smooth without any steps for improved gas flow. The front pipe side has been enlarged to 3 inches (76.3mm).
This will suit those larger front pipes to achieve more power gains.
HIGH STRENGTH / PRECISION FLANGE
The flange was entirely made with the precision lost wax process.
With sufficient thickness to cope with the harsh vibrations and high heat temperature. The front pipe side is molded without compromising the volume and to ensure a smooth exhaust flow.
DESIGN FEATURES
We have incorprated a dimple in the pipe where the bolt for the flange is located. To allow ease of access to both bolts & nuts to allow a quick, trouble free bolt on installation.
The capacity was maximized whilst ensuring the clearances with the transmission housing.
STREET LEGAL EAI MODEL (423001)
The PS13/RPS13 models come with the air intake EAI mechanism. However, almost all aftermarket outlet pipes are not designed for the EAI compatibility. This renders the vehicle in most regions not street legal due to the smog regulations. This is why our TOMEI design has incorporated this compatibility in our design.
This EAI feature is required for the smog regulations in Japan.
– Compatible with both the stock & EXPREME exhaust manifold.
– Can be used with the stock exhaust manifold setup.
– Install the EAI mechanism in a reverse position when using the EXPREME exhaust manifold.
MSRP: $390.00 (USD)
EAI JOINT PIPE (SOLD SEPARATELY)
PART NUMBER: 191232
MSRP $10.00 (USD)