METAL CATALYZER VERSION (Above) | STRAIGHT PIPE VERSION (Below)
The Master Of Lightweight Sports, Now Gets The Best Exhaust System!
Finally the long awaited Tomei Expreme full exhaust system for the 2005-2008 MX5 model is here! It has been long in the development as we had tested various types of prototype designs on various car setups. So here is the Dyno results we had achieved in the final design.
As y0u can see in on the Dyno, the powerband has been improved over the entire range. From low engine speeds all the way to the high rpm range.
PRODUCT LAYOUT
The product has been designed for performance gains and for exhaust gas purification (only the
Metal Catalyzer Version) and it’s well balanced. The original factory stock layout has also been retained in this design for the best weight reduction results.
The Flange of the Mufflers position is the same as the stock position. This allows you to retain the stock unit or other aftermarket brands.
EXHAUST MANIFOLD : The Best Exhaust Efficiency
4-2-1 equal length layout design
Uses a robust precise flange, and has the A/F Sensor boss.
The Lost-Wax casting process improves both precision and strength of the product.
By eliminating the first catalyst, we could achieve the best gas flow efficiency and further weight reductions.
METAL CATALYZER: More Power & Cleaner Emissions
The testing of several different types of cells, length & thickness, has led us to this 150cpsi cell design.
It produces the best performance gains with the right smog emissions to comply with street regulations in Japan.
Boss for the A/F Sensor.
Meets the Japanese street legal emission standards with just a single catalyst.
STRAIGHT PIPE : The Competition Model Designed for Ultimate efficiency & Weight Reduction
BACK PIPE: The Sub Silencer is Eliminated for Lightness & Best Gas Flow
METAL CATALYZER VERSION
– Entire Powerband Optimized
– 6.15kg (13.56 lbs) Lighter Than Stock
– Complies to Japans Exhaust Gas Emissions Standards
* Japan’s Emission Standards Certificate is also included.
STRAIGHT PIPE VERSION
– More Low-range Torque & Overall Power
– 7.25kg (15.98 lbs) Lighter Than Stock
– Designed for Competition Use
KIT CONTENTS
– EXHAUST MANIFOLD
– METAL CATALYZER / STRAIGHT PIPE
– BACK PIPE
– EXHAUST MANIFOLD GASKET
– BACK PIPE – MUFFLER GASKET
– CATALYZER PIPE – BACK PIPE GASKET
– THERMAL BANDAGE 50mm x 10m
– THERMAL BANDAGE BANDS (LONG) (SHORT)
– BLIND PLUG M18
– COPPER WASHER
– CAP BOLT M10 x L=25 x P=1.25
– CORN SPRINGS M10
– FLANGE BOLT M10 x L=35 x P=1.25
– FLANGE NUT M10 x P=1.25
– TIE WRAP
– BOLT SMOOTH PASTE
– STICKER (EXPREME)
– STICKER (TOMEI)
– WARRANTY CERTIFICATE
– JAPAN SMOG EMMISSIONS CERTIFICATE
※ Included in the Metal Catalyzer Version Kit Only
METAL CATALYZER VERSION
APPLICATION: MAZDA MX5 NCEC ‘05~’08 6MT
PART NUMBER : 193099
STRAIGHT PIPE VERSION
APPLICATION: MAZDA MX5 NCEC ‘05~’08 SMT / 6MT / 6AT
PART NUMBER : 193100