New Products: EVO 10 Turbo Downpipe

Another all new product from TOMEI POWERED!

After testing a variety of shapes and pipe diameters here at Tomei R&D Lab, we found the optimum tuning point for the best performance balance. This design will extract the full capabilities from the EVO 10 4B11 engine. The design also retains the original layout to help with the ease of installation and compatibility for other exhaust parts.

WIDE MOUTH
The smooth flowing design, without steps from the turbocharger.
Manufactured with the lost wax process, combines both strength and beauty.

3 INCH PIPE
After numerous tests, the 3 inches (76.3mm) greatly increases both power and torque.


Direct bolt on that retains the original stock layout.

Lost Wax casting process for maximum durability, precision without welds.

Larger in size and diameter, smooth without any steps.

The larger curve design makes it possible for a much larger capacity.

Improved efficiency through with a more linear layout

GOOD DESIGN FOR TOOLS
The wide mouth was designed to be easy to install with the general common work tools.

O2 SENSOR BOSS FOR AFR GAUGES
The mouting boss is an M18, which makes it easy to fit the AFR sensor.
Comes with a blind plug to seal the hole when not in use.

FLEXIBLE PIPE DESIGN
Easy to install with minimal risks to cracking the stainless steel exhaust manifolds from vibrations.

MIKALOR HIGH GRADE BANDS
The Supra Bands made by MIKALOR is what we have chosen to use, since they maintain the strongest torque to secure a proper strong connection. We also used Nejiname bolts.

KIT CONTENTS:
– OUTLET COMPONENT
– GASKET (TURBO SIDE)
– GASKET (CATALYZER)
– CLAMP BAND
– BLIND PLUG
– COPPER WASHER
– STUD BOLT M10-40 P=1.25 (THREAD 12/26)
– FLANGE NUT M12 * P=1.25
– STICKER (EXPREME)
– BOLT SMOOTH PASTE
– INSTALLATION MANUAL
– STICKER (TOMEI)
– WARRANTY CARD

Wide mouth & 3 inch piping.
Achieve large power & torque gains over stock.

PART NUMBER: 433001
MSRP: $450.00 USD


EXPREME

コメントを残す